Standard Off The Shelf Products

The majority of our products are sold through OEMs who integrate our products into other systems. Some of our products are commercially-available and can be referenced by reviewing the table listed below. Please contact us about your motion control application. Call: 630 806-7062 Ext. 206
Part NumberPhotoColorDescriptionPrice
CS3209A-1GRNJOYSTICK ACTUATOR
The CS3209A-1 is a single-axis joystick (left-right or up-down motion) that has been developed for
industrial and commercial applications in tough environments and harsh conditions.
2195
CS3209B-1TANJOYSTICK ACTUATOR
The CS3209B-1 is a single-axis joystick (left-right or up-down motion) that has been developed for
industrial and commercial applications in tough environments and harsh conditions.
2195
CS3248C-1TANITDS: PROGRAMMABLE DC MOTOR CONTROLLER
The CS3248C-1 is the 2nd-generation motor controller.
6395
CS3248D-1GRNITDS: ITDS: PROGRAMMABLE DC MOTOR CONTROLLER
The CS3248D-1 is the 2nd-generation motor controller.
6395
CS3249G-1GRNLRAS: LOW PROFILE DC MOTOR CONTROLLER
The CS3249G-1 has input/output and power ports that are located on the side of controller as opposed to the top. The top has special standoff mounting plate.
6895
CS3249-1TANLRAS:LOW PROFILE DC MOTOR CONTROLLER
The CS3249-1 has input/output and power ports that are located on the side of controller as opposed to the top. The top has special standoff mounting plate.
6895
ASM000131B-1-VEHICLE POWER CABLE ASSEMBLY
The ASM000131B-1 cable is an industrial grade assembly used to connect the auxiliary batteries to the fuse positive terminal. This cable can be adapted with different vehicle power terminations.
59
ASM001175A-1-JOYSTICK/THUMB CABLE
The ASM001175A-1 is an industrial grade insulated connection cable that provides a connection between motor controller and joystick or thumb drive. This cable is 57” long with 3 conductors.
425
ASM000135B-1-VEHICLE POWER CABLE ASSEMBLY
The ASM000135B-1 ia a 24 volt DC power cable with 2 #6AWG conductors in heat shrink tubing terminating in Amphenol 2-pin connector Mil-C-5015.
448
ASM000125B-1-BATTERY POWER CABLE ASSEMBLY
The ASM000125B-1 cable is an industrial grade assembly used to connect the auxiliary batteries to the fuse negative terminal. This cable can be adapted with different vehicle power terminations.
34
ASM000130B-1-VEHICLE POWER CABLE ASSEMBLY
The ASM000130B-1 cable is an industrial grade assembly used to connect the motor controller from the vehicle power bus to the fuse. This cable can be adapted with different vehicle power terminations.
69
ASM000127B-1-CABLE ASSEMBLY
The ASM000127B-1A-1 breakaway cable to vehicle BUS cable assembly.
call
ASM000216A-1-VEHICLE POWER CABLE ASSEMBLY
The ASM000216A-1 cable is an industrial grade assembly designed for the breakaway connection to the motor controller. The breakaway connector is a standard 2-wire battery connector commonly used for forklift truck batteries.
299
 

© 2021 Control Solutions LLC : Website Use and Privacy Statement

2520 Diehl Road   Aurora, IL 60502
630.806.7062